Triumph Sprint GT 1050 User Manual

110
Maintenance and Adjustment
Direction Indicator Lights
Front Indicator Bulb Replacement
1. Mirror glass
2. Securing screws
3. Bulb holder
Release the screws on the underside of the
mirror shell and remove the mirror glass to
gain access to the bulb holder.
Carefully remove the rubber bulb holder and
detach the bulb.
Installation is the reverse of the removal
procedure.
Rear Indicator Bulb Replacement
1. I n d i c a t o r l e n s
2. Lens screw
The lens on each indicator light is held in
place by a screw located in the body of the
light.
Release the screws and remove the lens to
gain access to the bulb for replacement.
Installation is the reverse of the removal
procedure.
Caution
Support the mirror glass in case it falls out
when releasing the screws.
ccnz
1
2
3
ccoa
1
2

Triumph Sprint GT 1050 Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Engine Capacity	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Tyre	120/70 ZR17
Rear Tyre	180/55 ZR17
Max Torque	108 Nm @ 6, 300 rpm
Exhaust	Stainless steel 3 into 1 exhaust system
Frame	Aluminium beam perimeter
Front Suspension	43 mm upside down forks with adjustable preload
Rear Suspension	Monoshock with adjustable preload and rebound damping
Front Brakes	Twin 320mm floating discs, Nissin 4-piston calipers
Rear Brakes	Single 255mm disc, Nissin 2-piston caliper
Seat Height	815 mm
Fuel Tank Capacity	20 litres
Max Power	130 PS / 128 bhp (96 kW) @ 9200 rpm