23
General Information
Clock/Trip Computer
1. Clock/Trip computer display
2. Scroll button
The clock and trip computer information
appear on the same display.
The trip computer provides an indication of
fuel consumption, fuel range to empty,
speed, time and distance, recorded and
calculated since the last reset.
Each display provides the following
information:
Instantaneous Fuel Consumption
An indication of the fuel consumption at an
instant in time.
Average Fuel Consumption
An indication of the average fuel
consumption is calculated from when the trip
computer was last reset. After a reset the
display will show dashes until 0.1 miles/km
has been covered.
Range
This is an indication of the probable distance
that can be travelled on the remaining fuel in
the tank.
Journey Distance
The total distance travelled, since the last
reset.
Journey Time
The total time elapsed, since the last reset.
Average Speed
The average speed is calculated from when
the trip computer was last reset. After a reset
the display will show dashes until 1 mile/km
has been covered.
Maximum Speed
The maximum speed achieved since the last
reset is displayed.
Trip Computer Operation
When the ignition is switched on, the clock
display is shown. To access the trip computer
information press the 'scroll' button.
Press the 'scroll' button repeatedly until the
desired display is visible. The trip computer
will scroll through in the order:
•Clock
• Instantaneous Fuel Consumption
• Average Fuel Consumption
•Range
• Journey Distance
• Journey Time
• Average Speed
•Maximum Speed
km/h
12
ccnl
To Next Page
Loading...
Need help?
General
