Installation
iSTAR Ultra Installation and Configuration Guide 2–9
4. Re-fit the enclosure cover and secure the cover with two tamper-proof screws using the
Software House security screwdriver (Part Number: 132-183).
Metal Enclosure
Figure 2-1: Metal IP-ACM Enclosure
Table 2-5: IP-ACM Metal Enclosure Dimensions
To Install the IP-ACM and Metal Enclosure:
1. Open the door of the IP-ACM metal enclosure.
2. Secure the enclosure to selected wall or support surface using holes provided in the
enclosure’s base. Refer to Table 2-1 for dimensions and hole pitch for mounting.
3. Fit and connect all customer cables. See Table 7-2 for more information regarding power
and wiring requirements.
4. Close and secure the metal enclosure cover.
Item Dimension
Weight ~2.6lb (~1.2kg)
Height 8.25in (209.6mm)
Width 7.34in (186.5mm)
Depth 3.46in (87.8mm)
To Next Page
Loading...
Need help?
General
