Unify OpenScape DECT Phone S5 User Manual

Getting to know your telephone 11
Getting to know your telephone
Switching the handset on/off
Locking/unlocking the keypad
The keypad lock prevents any accidental use of the telephone.
Lock/unlock the keypad: Press and hold
Control key
In the description below, the side of the control key (up, down, left, right) that you have to press in the
different operating situations is marked in black, for example for "press right on the control key" or
for "press the center of the control key".
In idle status
In submenus, selection and entry fields
During a conversation
Volume keys
Set volume for receiver/headset, ringtone, handsfree mode and indicating appointments: Press the vol-
ume keys / on the right side of the handset
Display keys
The display keys perform a range of functions depending on the operating situation.
Display key icons
p. 39
Switch on:
¤ When the handset is switched off, press the End call key and hold
Switch off:
¤ When the telephone is in idle status, press the End call key and hold
When a call is indicated on the handset, the keypad automatically unlocks and you can accept
the call. It then locks again when the call is finished.
It is not possible to call emergency numbers either when the keypad lock is activated.
The control key enables you to navigate the menus and input fields and also to call up
certain functions depending on the situation.
Open the directory Press briefly
Open the main menu or
Open the system menu
Confirm a function
Open the directory
Switch the microphone off/on
Select the left display
(only for HiPath Cordless Enterprise)
Adjust the loudspeaker volume for receiver and handsfree
mode
The display keys have a function preset by default in idle status. Change the assignment:
p. 32
Current display key
functions
Display keys
Back Save

Unify OpenScape DECT Phone S5 Specifications

General

Brand	Unify
Model	OpenScape DECT Phone S5
Category	Office Equipment
Language	English