More features 81
Deactivating do not disturb
c Press and hold down the Talk key.
Open the system menu.
> < [Select the menu item and confirm.
a Press the End call key to end the operation.
Call charge display
After a call has ended, the display shows the connection charges for the current
call as standard. If the costs are to be displayed continuously during an outgoing
call, this function must be requested from the carrier.
You can check and display the call charges for your phone number as a total for
a period that can be set by the service engineer.
First the call charges for the last charged call are displayed. The total call
charges are displayed after five seconds.
This function can also be called directly by entering the code
page 43.
c Press and hold down the Talk key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
a Press the End call key to end the operation.
Note:
If a call is transferred, the costs are assigned to the telephone to which
the call was transferred from this point onwards.
To Next Page
Loading...
Need help?
General
