Central directories (group directory) 61
Dialing a system speed dialing destination with suffix-dialing or a
DID number
System speed dialing destinations can be saved in your communications sys-
tem and then dialed by means of suffix-dialing or DDIA. These speed dialing
destinations let you enter an additional suffix-dialing or DID number up to five
seconds after entering the three-digit service code. If you do not make an entry
within this time frame, the default suffix-dialing number, for example, "0" for the
exchange, is dialed.
c Press and hold down the Talk key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
o Enter the required code (3 digits, 000 - 999).
o Within five seconds: enter the suffix-dialing or DID number.
System speed dialing, individual
You can save up to ten external phone numbers as speed dialing destinations
for your handset in your communications system. These speed dialing destina-
tions are dialed using a 2-digit code (*0 to *9). Please note that you may need to
save an external code in front of the phone number.
This function can also be called directly by entering the code
page 43.
Setting up an individual speed dialing destination
c Press and hold down the Talk key.
Open the system menu.
> < [Select the menu item and confirm.
> < [Select the menu item and confirm.
> Call the first destination.
> Call the next destination.
Open the additional menu.
> < [Select the menu item and confirm.
o Enter the external phone number (with external code).
Save the settings.
a Press the End call key to end the operation.
To Next Page
Loading...
Need help?
General
