Operating instructions 9
Operating instructions
These operating instructions describe your handset and its functions on your communications sys-
tem.
All functions that can be performed via your handset are described here. If some of the required
functions are not available on your handset, it may be due to one of the following:
• The function is not configured for you or your handset - please contact your system administra-
tor.
• Your communications platform does not feature this function - please contact your contract part-
ner for the communications system.
Alarm functionality
OpenStage M3 Plus and OpenStage M3 Ex Plus offer personal alarm functionality with voice
communication capability. A device with this functionality is also described in abbreviated form as
PNG (personal alarm device) or as PNG-S (personal alarm device with voice communication ca
-
pability).
A manual alarm can be triggered via an alarm key. Sensors detect non movement, man down and
escape states, which can be signalled as automatic alarms.
An integrated time alarm function is used to determine whether the person being monitored is still
responsive. A pull cord is used to check whether the OpenStage
M3 Plus is still on the monitored
person.
OpenStage M3 Plus and OpenStage M3 Ex Plus optionally monitor the following operating func-
tions:
• Battery charging
• Synchronicity with DECT base
• Communication with an alarm server
A technical warning is reported on the handset in the event of a malfunction.
For more information on the alarm functionality please refer to Page 71.
Only for OpenStage M3 Plus and OpenStage M3 Ex Plus!
To Next Page
Loading...
Need help?
General