Setting the handset 63
Activating/deactivating automatic call
answering
This function allows you to accept calls by removing the handset from the charg-
ing shell.
v Open the handset's main menu.
u v [ Select the menu icon and confirm.
s t [ Select the menu item and confirm.
s t Select the menu item.
Press the display key. The activated function is ticked (³) and can be deacti-
vated by selecting it once more.
Setting the date and time
The date and time setting can be used to ensure that the date and time are as-
signed correctly to incoming calls and in order to use the alarm.
The handset date and time are automatically set when you set up a call to an-
other station. If your communications system does not support this function, you
can set the date and time manually.
Either:
v Open the handset's main menu.
u v [ Select the menu icon and confirm.
s t [ Select the menu item and confirm.
Or: If the date and time have not yet been set:
Press the display key.
then:
o Enter the date, for example 22.09.2007 = 22092007.
s Move the cursor down one line.
o Enter the time, for example 19:05 = 1905.
Save the settings.
Can only be set if this menu item is visible. To set, see Page 67.
To Next Page
Loading...
Need help?
General