Unify OpenStage M3 Plus User Manual

Putting the handset into service 11
To disconnect the flat plug from the charger, press the release button and dis-
connect the flat plug.
Fitting the attachment clip
1. Press the attachment clip pin on the back of the handset until the tabs on the
sides engage audibly in the recesses on the phone.
2. Slide the attachment clip onto the pin as it clicks audibly into place.
3. Secure the handset with the attachment clip to the belt. To do this, open the
brackets by squeezing the free end and attach it to the belt.
To remove the handset, press the opener on the attachment clip and slide the
handset from the pin.

Unify OpenStage M3 Plus Specifications

General

Brand	Unify
Model	OpenStage M3 Plus
Category	IP Phone
Language	English