17 “Translation of the original instruction”
3.2 Basic principle
The implementation of "pre-delivery" is the responsibility of the dealer.
Perform "pre-delivery" inspection before each delivery. The purpose of the inspection is
to find out if there is a significant problem before the machine is put into use.
Damaged or altered machines should not be used. If any damage is found or
non-approved parts fitted from original manufacturer’s parts, the machine should be
removed from service and reported.
According to the manufacturer's regulations, only qualified service technicians can
repair the machine.
In accordance with the requirements set out in the manufacturer's specifications and
duties manual, periodic maintenance inspections should be performed by qualified
service technicians.
3.3 Specification
Use the machine's operating manual.
"Pre-delivery preparation" consists of a pre-operation check, maintenance item, and
functional test.
Use this form to record the results. After completing each part, mark the corresponding
box. Follow the instructions in the operating instructions.
If any of the checks are marked as "N", the machine is deactivated, repaired and
rechecked. After repair, mark the box marked "R".
Y = Yes, has been completed
N = No, cannot complete
R= R = has been repaired
Note
To Next Page
Loading...
Need help?
General
