Upright MX Series User Manual

23 “Translation of the original instruction”
A-3
4.1.3Perform Pre-operation Check
Instant UpRight
requires this procedure to be
carried out every 8 hours or at minimum daily.
Completing the "pre-operation check" is essential
for safe operation of the machine. The
pre-operation check is the visual inspection of the
operator before each work shift. The purpose of
the inspection is to find out if there is a significant
problem with the machine before the operator
performs the functional test. Pre-operation
checks can also be used to determine if routine
maintenance procedures are required.
The corresponding operating manual contains
complete information about the execution of this
procedure. Please refer to the "Operation
Manual" on the machine.
A-4
4.1.4 Perform Functional Tests
Instant UpRight requires this procedure to be
carried out every 8 hours or at minimum daily.
Completing the functional test is critical to safe
operation of the machine. Functional tests are
used to detect faults before starting to use the
machine.. If a fault is found, the machine must
be marked and taken out of service for repair
stopped. The use of faulty machines is forbidden
The corresponding operating manual contains
complete information about the execution of this
procedure. Please refer to the "Operation
Manual" on the machine.

Upright MX Series Specifications

General

Brand	Upright
Model	MX Series
Category	Scissor Lifts
Language	English