Upright MX Series User Manual

46 “Translation of the original instruction”
1-2
5.1.2 Method to Remove the Handle
1.Press the red "emergency stop" button on the ground
and platform controller into the OFF position.
2.Disconnect the platform controller from the control
cable on the platform.
3.Remove the fasteners that secure the platform
control box to the platform controller bracket.
4.Remove the fasteners that secure the bottom cover
to the platform control box. Open the control box.
5.Unlock the strap of the fixed harness.
6.Carefully disconnect the operating handle harness
from the platform controller board.
Risk of electric shock / burn. Exposure to live circuits
can result in death or serious injury. Remove all rings,
watches and other accessories.
Risk of damage to parts. Electrostatic discharge
(SED) can damage printed circuit board components.
When operating on printed circuit boards, keep them
in good contact with the metal parts that are always
grounded on the machine, or use ground tapes.
7.Carefully remove the handle fasteners.
8.
Carefully remove the operating handle from the
platform control box.
Torque specifications
Operating handle fasteners 1Nm
1-3
5.1.3 Method to Remove the Platform
Alarm
1.Press the red "emergency stop" button on the
ground and platform controller into the OFF position.
2.Disconnect the platform controller from the control
cable on the platform.
3.Remove the fasteners that secure the platform
control box to the platform controller bracket.
4.Remove the fasteners that secure the bottom cover
to the platform control box. Open the control box.
5.Disconnect the red and black lines from the alarm.
Risk of electric shock / burn. Exposure to live
circuits can result in death or serious injury. Remove
all rings, watches and other accessories.
Risk of damage to parts.
Electrostatic discharge (SED) can damage printed
circuit board components. When operating on printed
circuit boards, keep them in good contact with the
metal parts that are always grounded on the machine,
or use ground tapes.
6.Carefully remove the alarm
from the platform
control box.

Upright MX Series Specifications

General

Brand	Upright
Model	MX Series
Category	Scissor Lifts
Language	English