Upright MX Series User Manual

44 “Translation of the original instruction”
5.1 Platform Controller
The repair program must be carried out by personnel
trained and qualified for this machine.
Damaged or malfunctioning machines should be marked
immediately and removed from service.
Repair all the damage and trouble before operating the
machine.
Read, understand and follow the safety instructions and
operating instructions in the operating instructions.
Be sure to have all the necessary tools and required
parts for use.
Read each program in its entirety and strictly follow the
instructions. Attempts to take shortcuts may cause risk
factors.
If it is not otherwise specified, then each repair
procedure can only be performed when the machine is
in the following states:
 Place the machine on a solid horizontal surface
 The platform is in stowed position
 The key switch is in the OFF position and the key is
unplugged
 The red "emergency stop" button for the ground
and platform controllers is in the OFF position.
 The wheel is in locked status.
The m
achine has been disconnected from all
external AC power supplies.
About this section
Most of the procedures in this section should be
carried out by trained professional service
personnel in well-equipped workplaces. When
the fault is found, select the appropriate repair
program.
Perform the disassembly procedure to remove
the faulty part. Repair
and/or replace faulty
part. Reassemble in the reverse order and test all
functions.
Symbol Legend
Safety warning signs - used to
warn of potential danger of personal injury.
Observe all safety information after the mark to
avoid possible injury or death.
Indicates that an emergency hazard condition, if
not avoided, could result in death or serious
injury.
Warning that a potentially dangerous situation, if
not avoided, can result in death or serious injury.
Indicates a dangerous situation, if not avoided,
could result in minor or moderate personal injury.
Indicates a potentially hazardous situation that, if
not avoided, could result in property damage.
Tips:- After completing a series of steps, specific
results may appear.
Indicates tha
t an error result occurs after
completing a series of steps.
5. Repair procedures

Upright MX Series Specifications

General

Brand	Upright
Model	MX Series
Category	Scissor Lifts
Language	English