• Decrease a parameter value.
• Press the down arrow button.
The parameter decreases one step at a time.
• Press and hold down the down arrow button.
The parameter value decreases continuously.
• Select the next parameter to be changed.
Press the
button.
3.10.5.3 Setting the implement width
GUID-A4A6D237-C3F1-4670-86FE-5E11C540845A
1. Implement width
1. Activate the implement width in the setting mode.
2. Change the value.
3.10.5.4 Changing the hour display
GUID-90E2425C-1409-4C2C-A157-F845D9E5A823
1. Hour display
1. Activate the hour display in the setting mode with the button.
When the hour display is blinking, you can set the hours.
2. Change the value with the arrow buttons.
3. Operation
- 153 -
To Next Page
Loading...
Need help?
General
