Service code information
The service code symbol is displayed if one or more service codes are active.
The symbol disappears when the error has been fixed and power turned off.
Power take-off (PTO) information
•
In the basic mode view, the symbol for the rear PTO
is shown only if the
rear PTO is rotating. If rear PTO is selected as fixed, also the rotating speed
is shown on the bottom line. The accuracy of the speed view is 10 rpm.
•
In the basic mode view, the symbol for the front PTO
is shown only if
the front PTO is rotating. If front PTO is selected as fixed, also the rotating
speed is shown on the bottom line. The accuracy of the speed view is 10
rpm.
If both the rear PTO and front PTO are rotating, the rear PTO speed is
shown.
•
The symbol for the Auto PTO
is displayed when the Auto PTO function
is enabled.
AdBlue information
• The AdBlue level bar indicates the level of the AdBlue/DEF under normal
operation.
AdBlue level bar indication
AdBlue level
10% AdBlue symbol is lit for 10 seconds.
5% AdBlue symbol is lit continuously.
0% AdBlue symbol blinks.
Engine's power output begins to decreases in stages. After 30 minutes
the engine remains idle.
IMPORTANT:
In some situations (for example, after working with a heavy load) when you
engage the parking brake, the engine may perform cooling of the after-treatment
system by increasing the idling rpm momentarily. The word COOL flashes on the
A-pillar display.
3. Operation
- 161 -
To Next Page
Loading...
Need help?
General
