Vatech PaX-i3D Smart Installation Manual

Pax-i3D Smart(PHT-30LFO) Installation Manual
128
9 Acquiring the test image
9.1 Aligning the collimator
9.1.1 PANO collimator Alignment
AdultmodeAlignment
1.
Remove the Temple support and Normal bite block from the unit
2.
Run
CollimatorAlign.exe
.
Path: C\VCaptureSW\Util\CollimatorAlign\CollimatorAlign.exe
3.
Click
Align Pano
tab.
4.
Type
50
kVp,
5.0
mA in the KVp/mA led.
5.
Click
Initial
and wait until the system is initialized.
6.
Click
Capture
when it is enabled.
7.
When Align Sequence window appears, press the X-ray exposure switch
Stay outside of the X-ray shielding room during the exposure.

Vatech PaX-i3D Smart Specifications

General

Brand	Vatech
Model	PaX-i3D Smart
Category	Dental equipment
Language	English