Vertiv NetSure 7100 Series User Manual

Vertiv | NetSure 7100 Series Quick Start Guide (QS582127000) | Rev. T
128
Final Steps
Procedure
1. If any controller configuration settings were changed, refer to the ACU+ Instructions (UM1M820BNA or
UM1M820DNA400) or NCU Instructions (UM1M830BNA) and save a copy of the configuration file. This
file can be used to restore the controller settings, if required, at a later date.
NOTE! Note that provided on a USB drive furnished with the system is a controller configuration
drawing (C-drawing) and the controller configuration files loaded into the controller as shipped.
2. Close the distribution cabinet’s front door and turn the latch clockwise to secure the door (system’s in a
relay rack), or close the system’s enclosure door.
3. Verify all rectifier and converter modules and the controller are fully seated, latched, and the latch
handle screws secured.
4. Verify there are no external alarms and the local indicators are as shown in Table 9.

Vertiv NetSure 7100 Series Specifications

General

Brand	Vertiv
Model	NetSure 7100 Series
Category	Power Supply
Language	English