To Next Page

To Previous Page

28 - ENGLISH

5.3.3

Insert into the reader a smart card pro-

grammed by the synchronising reader.

Synchronising

card

Synchronising

card

5.3.2

Press the front button within 15 sec-

onds. The LED blinks green

Warning!

If the button is not pressed within 15

seconds, the LED turns green and the

system switches to the “Initialise reader

and program smart cards” procedure.

To exit the procedure, place dip-switch 1

in the OFF position.

Repeat the procedure from step 5.3.1

5.3

Synchronising readers

The “Synchronising Readers” procedure configures several

different readers to work using the same smart card, the

same address and the same code.

1 2 3

4 5 6

7 8

5.3.1

Place dip-switch 1, on the reader being

synchronised, in the ON position.

The LED lights up yellow.

Synchronising a non-initialised reader

Vimar Eikon Instruction Handbook

Other manuals for Vimar Eikon