24
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
phonebook or caller ID log or redial while
you are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes) from
the phonebook, caller ID log or redial list.
To access a number in the phonebook
while on a call:
1. Press MENU and then press q or p to
select Phonebook.
2. Press SELECT and then press q or p
to scroll to the desired entry.
3. Press SELECT to dial the displayed
number.
To access a number in the caller ID log
while on a call:
1. Press MENU and then press q or p to
select Caller ID log.
2. Press SELECT and then press q or p
to scroll to the desired entry.
3. Press SELECT to dial the displayed
number.
To access a number in the redial list
while on a call:
1. Press and hold REDIAL.
2. Press q or p to browse to the desired
entry.
3. Press SELECT to dial the displayed
number.
• Press CANCEL to exit redial, phonebook or
caller ID log when you are on a call.
Find handset
You can use the Page/Intercom feature to
find your misplaced cordless handset.
To start intercom paging:
• Press PAGE on the right side of the
telephone base when not in use to
make intercom call to the cordless
handset.
• If you have two or more handsets, the
telephone makes intercom paging to all
handsets.
To end intercom paging:
• Press TALK or on the handset to take
the intercom call.
-OR-
• Press PAGE on the telephone base.
To Next Page
Loading...
Need help?
General
