29
Edit a phonebook entry
1. Search for the desired entry in the
phonebook (see Review a phonebook
entry or Alphabetical search).
2. When the desired entry appears, press
SELECT. The handset displays EDIT
NUMBER and the stored number.
3. Use the dialing keys to edit the
number, then press SELECT. The
handset displays EDIT NAME and then
the stored name.
4. Use the dialing keys to edit the name.
Additional key presses show other
characters of that particular key.
The first character of every word is
capitalized.
5. Press SELECT to save. The handset
displays Saved to phonebook and
then you hear a confirmation tone.
Dial a phonebook entry
1. Search for the desired entry in the
phonebook (see Review a phonebook
entry or Alphabetical search).
2. When the desired entry appears, press
TALK on the handset to dial.
Caller ID
If you subscribe to caller ID service,
information about each caller appears after
the first or second ring. If you answer a call
before the caller information appears on
the screen, it will not be saved in the caller
ID log.
The caller ID log stores up to 50 entries.
Each entry has up to 24 digits for the
phone number and 15 characters for the
name.
If the telephone number has more that 15
digits, only the last 15 digits appear.
If the name has more than 15 characters,
only the first 15 characters are shown and
saved in the caller ID log.
Entries appear in reverse chronological
order. When the caller ID log is full, the
oldest entry is deleted to make room for
new incoming call information.
• This product can provide information
only if both you and the caller are in areas
offering caller ID service and if both
telephone service providers use compatible
equipment. The time and date are sent by
your telephone service provider along with
the call information.
Review a caller ID log entry
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to scroll to Caller ID log,
and then press SELECT.
3. Press SELECT again and then press q
or p to browse.