31
Delete the caller ID log entries
1. Review the caller ID log entries.
2. When the desired caller ID log entry
displays, press DELETE. You hear a
confirmation tone.
To delete all caller ID log entries:
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to select Caller ID log
and then press SELECT.
3. Press q or p to select Del all calls then
press SELECT.
4. The screen displays Delete all calls?.
Press SELECT to confirm. You hear a
confirmation tone.
Smart call blocker *
If you have subscribed to caller ID service,
then you can use the Smart call blocker
feature to screen incoming calls.
Smart call blocker is on, once you install
your telephone. It allows all incoming calls
to get through and ring by default. You can
change the Smart call blocker settings to
screen incoming calls.
With call screening active, Smart call
blocker screens and filters all incoming
calls from numbers or names that are not
yet saved in your directory, allow list, block
list, or star name list. You can easily add
incoming phone numbers to your allow list
and block list. This allows you to build up
your lists of allowed and blocked numbers,
and Smart call blocker will know how to
deal with these calls when they come in
again.
Call categories
Calls are classified into four categories.
Smart call blocker handles the calls in the
following ways:
Call category Call control
Welcome calls
Numbers
saved in allow
list.
Numbers
saved in
phonebook.
Numbers not
found in block
list.
Names saved
in star name
list.
Allow
The telephone rings when
there is an incoming call
with number saved in your
allow list or phonebook,
but not in your block list.
Robocalls with caller names
saved in your star name list
will also ring.
Unwelcome
calls
Numbers
saved in block
list.
Block
The telephone does not
ring when there is an
incoming call with number
saved in your block list, and
the call will be rejected.
To Next Page
Loading...
Need help?
General
