32
Call category Call control
Calls without
numbers
Numbers that
are “out of
area” or set to
“Private“.
Uncategorized
calls
With absent
caller ID
number.
Numbers
not found in
phonebook.
Numbers not
found in allow
list.
Numbers not
found in block
list.
Caller ID
names not
found in star
name list.
Option 1: Screening with
caller name
If you have selected this
option, the telephone
plays the screening
announcement, and then
asks the caller to say his/her
name before the call rings
on your telephone. You
will then hear the caller’s
name announced if you
have turned on the caller
ID announce feature. Then,
you can decide whether to
accept or reject the call, or
to forward the call to the
answering system.
Option 2: Screening
without caller name
If you have selected this
option, the telephone
plays the screening
announcement, and then
asks the caller to press
the pound key (#) before
the call rings on your
telephone. You can then
answer the call.
Option 3: Allow (default
settings)
The telephone allows the
calls to get through and
ring. The caller’s number
will not be saved to the
allow list.
Option 4: Answering
system
If you have selected this
option, the telephone
forwards the calls to the
answering system without
ringing.
Option 5: Block
If you have selected this
option, the telephone
rejects the calls with block
announcement without
ringing. The caller’s
number will not be saved
to the block list.
• Smart call blocker is set to on, and to allow
all incoming calls by default. When Smart call
blocker is on, the first ring of all incoming
calls will be muted.
• If your phonebook, allow list, star name list
and block list are empty when Smart call
blocker is on, and you have set to screen
calls, the telephone will screen all incoming
calls and asks callers to announce their
names or press the pound key (#).
• If Smart call blocker is off, all incoming calls
ring, including numbers saved in your block
list.
Set Smart call blocker on/off
The Smart call blocker feature is set to on
by default.
1. Press CALL BLOCK on the cordless
handset when it is not in use.
-OR-
Press MENU to enter the main menu
when it is not in use. Press q or p
to scroll to Smart call blk, then press
SELECT.
2. Press SELECT again to choose
SCB On/Off.
3. Press q or p to choose On or Off,
and then press SELECT.
* Includes licenced Qaltel™ technology.
Qaltel™ is a trademark of Truecall Group Limited.
To Next Page
Loading...
Need help?
General
