Safety precautions
SV00068GB 19
In particular, make sure that the cutting blade is in good conditions
(replace immediately if torn, damaged or bent), the cutting blade is
properly mounted, the protective hood is locked in place, the V-belt has
the proper tension, the throttle moves easily and the half-throttle lock
button functions properly, the handles are clean and dry, and the
combination switch functions properly.
4.5.6 Start the cut-off saw only after complete assembly and inspection.
Never use the cutt-off saw when it is not completely assembled.
4.6 Cutting blades
4.6.1 The protective hood must always be on! Change cutting blades
only with the engine off!
Always make sure to observe the „direction of rotation“ markings.
When using diamond cutting blades.
4.6.2 Cutting blades have been designed exclusively for radial loads. Never
use the side face of the cutting blade for grinding purposes, as there is
danger of blade fracture.
ATTENTION!
Never change direction (turning radius less than 5 meters (16
feet), exert lateral (sideways) pressure, or cant the cut-off saw
during cutting applications (11)!
4.6.3 Use a cutting blade only for cutting the materials it is intended for. The
proper type of blade must be selected for either metals or concrete.
10
min. 5 m
(16 feet)
11
To Next Page
Loading...
Need help?
General
