Wacker Neuson BTS Series User Manual

Maintenance
T00963GB 51
8.5 Replacing the spark plug
ATTENCION:
Do not touch the spark plug or plug cap if the engine is running
(high voltage).
Switch off the engine before starting any maintenance work.
A hot engine can cause burns. Wear protective gloves!
The spark plug must be replaced in case of damage to the insulator,
electrode erosion (burn) or if the electrodes are very dirty or oily.
ATTENCION: Use only BOSCH WSR 6F spark plug, CHAMPION
RCJ-6Y or NGK BPMR 7A.
The use of a non-approved spark plug may result in damage to the
ignition system.
Turn the cover lock (6) to the “Unlocked “ position and carefully
remove the filter cover (7).
Flip up spark plug cover (8). Pull plug cap (9) off spark plug. Remove
spark plug only by using universal wrench delivered with machine.
Electrode gap
The electrode gap must be 0.5 mm (0,020“).
57

Wacker Neuson BTS Series Specifications

General

Brand	Wacker Neuson
Model	BTS Series
Category	Saw
Language	English