FBTS
T00964GB 62
9. FBTS
9.1 Guide cart
The WACKER guide cart makes it much easier to carry out straight
cuts, while simultaneously enabling almost untiring working. It can be
adjusted for the operator‘s height, and can be operated with the cutting
arm mounted in the inboard or outboard position. For easier refuelling
when using the trolley, we recommend adding an angled tank filler
neck.
The guide cart has been equipped with a water tank and a water spray
system; the water will bind the dust during the cutting process and will
also help to cool the cutting disc.
Notches have been added to the area of the clamp lever, thus making
it easier to adjust the cutting depth of the blade. One notch is
equivalent to 10 mm (0,4“) cutting depth.
To Next Page
Loading...
Need help?
General
