Putting into operation
T00962GB 41
7.5 Refuelling
ATTENCION: FOLLOW THE SAFETY PRECAUTIONS BY ALL
MEANS!
Be careful and cautious when handling fuels.
The engine must be turned off and cooled down!
Carefully clean the area around the fuel-tank filler neck to keep dirt
from getting in the tank.
Place the unit on its side on an even surface.
Unscrew the tank cap and fill tank with fuel mixture. Take care to avoid
spilling.
Tightly screw on the plug.
Clean tank cap and surrounding area after refuelling. Never start
or operate the cut-off saw in the same place as it was fuelled!
Fuel mixture
38
To Next Page
Loading...
Need help?
General
