Putting into operation
T00962GB 36
7. Putting into operation
ATTENTION:
Always turn off the engine and pull off the spark plug
cap before doing any work on the cut-off saw! Always
wear protective gloves!
ATTENTIONE:
Start the cut-off saw only after complete assembly and
inspection.
For the the following work, use the assembly tools included with
delivery:
Place the cut-off saw on a stable surface and carry out the following
assembly steps:
30
1.13/19 AF universal wrench
2. Allen key
3. Carburetor adjustment
screwdriver
1
2
3
31
To Next Page
Loading...
Need help?
General
