Maintenance
T00963GB 46
8. Maintenance
ATTENCION
Before doing any work on the cut-off saw turn off the engine,
remove the cutting blade, pull the plug cap off the spark plug and
wear protective gloves!
ATTENCION
Start the cut-off saw only after complete assembly and
inspection.
NOTE
Because many of the parts and assemblies not mentioned in this
Instruction Manual are vital to the safety of the unit, and because
all parts are subject to a certain amount of wear and tear, it is
important for your own safety that you have the unit checked and
maintained regularly by a WACKER service station.
ATTENCION:
If the cutting blade should have broken during a cutting
application, take the cut-off saw to a WACKER service
station for its repair before using the machine again!
48
SERVICE
49
To Next Page
Loading...
Need help?
General
