Manual Manual 37223E 37223E easYgen-3000 easYgen-3000 Series Series (Package (Package P1) P1) - - Genset Genset ControlControl
Page Page 48/67 48/67 © © WoodwardWoodward
Discrete Inputs: Negative Polarity SignalDiscrete Inputs: Negative Polarity Signal
Discrete input 1Discrete input 1
6666
Power supply -Power supply -
Discrete input 2Discrete input 2
Discrete input 3Discrete input 3
Discrete input 4Discrete input 4
Discrete input 5Discrete input 5
Discrete input 6Discrete input 6
Discrete input 7Discrete input 7
Discrete input 8Discrete input 8
Discrete input 9Discrete input 9
Discrete input 10Discrete input 10
Discrete input 11Discrete input 11
Discrete input 12Discrete input 12
PowPower suppler supply + (8 ty + (8 to 40 Vdc)o 40 Vdc)
6677
6688
6699
7700
7711
7722
7733
7744
7755
7766
7777
7788
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Power supply -Power supply -
Figure 6-42: Discrete inputs - alarm/control input - negative signalFigure 6-42: Discrete inputs - alarm/control input - negative signal
Terminal Terminal Description Description AA
maxmax
66 66 Discrete Discrete inputs inputs - - GND GND (common (common ground) ground) 2.5 2.5 mm²mm²
67 67 Discrete Discrete input input [DI [DI 01]; 01]; pre-assigned pre-assigned to to 'Emergency 'Emergency stop' stop' 2.5 2.5 mm²mm²
68 68 Discrete Discrete input input [DI [DI 02]; 02]; pre-assigned pre-assigned to to 'Start 'Start in in AUTO' AUTO' 2.5 2.5 mm²mm²
69 69 Discrete Discrete input input [DI [DI 03]; 03]; pre-assigned pre-assigned to to 'Low 'Low oil oil pressure' pressure' 2.5 2.5 mm²mm²
70 70 Discrete Discrete input input [DI [DI 04]; 04]; pre-assigned pre-assigned to to 'Coolant 'Coolant temperature' temperature' 2.5 2.5 mm²mm²
71 71 Discrete Discrete input input [DI [DI 05]; 05]; pre-assigned pre-assigned to to 'External 'External alarm alarm acknowledgement' acknowledgement' 2.5 2.5 mm²mm²
72 72 Discrete Discrete input input [DI [DI 06]; 06]; pre-assigned pre-assigned to to 'Enable 'Enable MCB' MCB' 2.5 2.5 mm²mm²
73 73 Discrete Discrete input input [DI [DI 07]; 07]; fixed fixed to to 'Reply 'Reply MCB' MCB' 2.5 2.5 mm²mm²
74 74 Discrete Discrete input input [DI [DI 08]; 08]; fixed fixed to to 'Reply 'Reply GCB' GCB' 2.5 2.5 mm²mm²
75 75 Discrete Discrete input input [DI [DI 09] 09] 2.5 2.5 mm²mm²
76 76 Discrete Discrete input input [DI [DI 10] 10] 2.5 2.5 mm²mm²
77 77 Discrete Discrete input input [DI [DI 11] 11] 2.5 2.5 mm²mm²
78 78 Discrete Discrete input input [DI [DI 12] 12] 2.5 2.5 mm²mm²
Table 6-26: Discrete input - terminal assignmentTable 6-26: Discrete input - terminal assignment
WARNING
WARNING
Discrete Input DI01 Discrete Input DI01 "Emergency Stop" is only a signaling input. This input may only be used t"Emergency Stop" is only a signaling input. This input may only be used to signalo signal
that an external emergency stop button has been acthat an external emergency stop button has been actuated. According to EN 60204, this input is tuated. According to EN 60204, this input is notnot
approved to be used as the approved to be used as the emergency stop function. The emergency stop function must be imple-emergency stop function. The emergency stop function must be imple-
mented external to the control and mented external to the control and cannot rely on the control to function properly.cannot rely on the control to function properly.
To Next Page
Loading...
Need help?
General
