12 - 13
Standard Connector Pinouts
Note: The following pin assignments are not compatible with Honeywell legacy
products. Use of a cable with improper pin assignments may lead to
damage to the unit. Use of any cables not provided by the manufacturer
may result in damage not covered by your warranty.
Keyboard Wedge
10 Pin RJ41 Modular Plug - connects to the base
Serial Output
10 Pin RJ41 Modular Plug - connects to the base
1 Cable shield
2Cable select
3 Supply ground
4 Terminal data
5 Terminal clock
6 Keyboard clock
7 Supply power input +5V
power
8 Keyboard data
9
1 Cable shield
2 Cable select
3 Supply ground
4 Transmit data
5 Receive data - serial data to scanner
6CTS
7 +5V power
8RTS
9
10
To Next Page
Loading...
Need help?
General