Name: Xenon 1900
Brand: Xenon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2 - 30

Scanner-Bioptic ACK/NAK Mode

Bioptic ACK/Nak On must be scanned so the scanner will wait for an ACK

or NAK from a bioptic scanner after each packet is sent. The Scanner-

Bioptic ACK/NAK Timeout (below) controls how long the scanner will wait

for a response.

Default =

Bioptic ACK/NAK Off.

Scanner-Bioptic ACK/NAK Timeout

This allows you to set the length (in milliseconds) for a timeout for a bioptic

scanner’s ACK/NAK response. Scan the bar code below, then set the time-

out (from 1-30,000 milliseconds) by scanning digits from the inside back

cover, then scanning Save.

Default = 5100.

* Bioptic ACK/NAK Off

Bioptic ACK/NAK On

ACK/NAK Timeout

Questions and Answers:

Need help?

Do you have a question about the Xenon 1900 and is the answer not in the manual?

Xenon 1900 Specifications

General