To Next Page

To Previous Page

SETTING UP THE FIERY EXP4110 FROM THE CONTROL PANEL

Fiery E-mail Domain Name

This option appears only if you have selected Yes to Enable Remote Diagnostics. For more

information, see the documentation that accompanies your printer. Enter the mail box

name speciﬁed on the mail server. The client mail service acknowledges e-mails sent to the

Fiery EXP4110 E-mail Service using this account name.

Enter the name of the domain in which the Fiery EXP4110 e-mail account is located, up to a

maximum of 19 characters. This is typically the part of the e-mail address that follows the @

symbol. For example, in the address pat@test.com, the domain name is test.com.

Account Name

youraccount

Enter the mailbox name speciﬁed on the mail server, up to a maximum of 78 characters. The

client mail service acknowledges e-mails sent to the Fiery EXP4110 E-mail Service using this

account name.

This is the internal name your network recognizes, which is not necessarily the same as User

Name. Use the following characters for the account name:

0-9 A-Z, ! # $ % & ‘ * + - / = ? ^ _ ‘ { | } ~

Password

Enter the password for the e-mail account, up to a maximum of 16 characters.

Administrator E-mail User Name

youremail@yourdomain.com

Enter the user name of the Administrator e-mail account, up to a maximum of 80 characters.

This is typically the part of the e-mail address that precedes the @ symbol. For example, in the

address pat@test.com, the user name is pat.

Administrator E-mail Domain Name

yourdomain.com

Enter the name of the domain where the administrator has an account, up to a maximum of

19 characters. This is typically the part of the e-mail address that follows the @ symbol. For

example, in the address pat@test.com, the domain name is test.com.

Timeout (sec)

30–300 [30]

Enter the length of time, in seconds, the Fiery EXP4110 should try to connect to each e-mail

server before determining that the connection is unsuccessful.

Polling Interval (sec)

5-3600 [15]

If you have enabled auto-checking for new messages in the previous option, enter the interval

in seconds at which the Fiery EXP4110 should automatically check for new e-mail.

Xerox 4110 Configuration And Setup

Other manuals for Xerox 4110