IP Filtering
Xerox
®
B210 Printer
User Guide
169
IP Filtering
You can prevent unauthorized network access by creating an IP Filter to block or allow data sent from
particular IP addresses.
Note: Be careful not to filter the IP address of any device used to administer the printer.
Enabling IP Filtering
1. In Xerox
®
CentreWare
®
Internet Services, click Properties Security.
2. Click IP Filtering.
Note: If prompted to enter a user name and password, for information about logging in as an
administrator, refer to Accessing the Xerox
®
CentreWare
®
Internet Services Administrator Account.
3. To enable IP filtering, select IPv4 Filtering Enabled, IPv6 Filtering Enabled, or both.
4. To permit access to the device, type the IP Address and Port or Prefix as needed.
5. Click Apply.
To Next Page
Loading...
Need help?
General