Xerox B210DNI User Manual

IPSec
Xerox
®
B210 Printer
User Guide
170
IPSec
Internet Protocol Security (IPSec) is a group of protocols used to secure Internet Protocol (IP)
communications. The IPSec feature authenticates and encrypts each IP data packet.
If you select IPSec, all printer traffic uses IPSec protocols, including:
Configuring IPSec
1. In Xerox
®
CentreWare
®
Internet Services, click Properties  Security.
2. Click IPSec.
Note: If prompted to enter a user name and password, for information about logging in as an
administrator, refer to Accessing the Xerox
®
CentreWare
®
Internet Services Administrator Account.
3. To enable the protocol, for Protocol, select Enabled.
Note: To enable IPSec, enable SSL and connect to device using HTTPS.
4. To remove IPSec connections, click Flush All IPSec Connections.
5. For Shared Secret, enter the shared key value.
6. For Verify Shared Secret, re-enter the shared key value.
7. To save the new shared key, select Select to save new Shared Secret.
8. Click Apply.
• DHCP v4/v6 (TCP and UDP)
• DNS (TCP and UDP)
•FTP (TCP)
• HTTPS (Web Server, TCP port 443)
•ICMP v4/v6
• IPP (TCP port 631)
• LPR Print (TCP port 515)
• Port 9100 Print (TCP port 9100)
• SMTP (TCP/UDP port 25)
• SNMP (TCP/UDP port 161)
• SNMP Traps (TCP/UDP port 162)
• WS-Discovery (UDP port 3702)

Xerox B210DNI Specifications

General

Brand	Xerox
Model	B210DNI
Category	Printer
Language	English