DocuColor 5000 User Guide
1-5
1. Overview
Ground Fault Indicator (GFI) circuit breakers
The digital press is equipped with two safety circuit breakers
called a Ground Fault Indicators (GFI). These devices trip if the
power to the digital press is interrupted.
Fuser GFI The Fuser receives power through the Fuser GFI.
Digital Press GFI The digital press receives power through the Digital Press GFI. If
an optional Second Feeder Module is connected to the Digital
Press, then it too receives power from this GFI.
After a power outage
occurs:
Power on the digital press as soon as possible after the power is
restored, and print a job to ensure that there is no damage to the
digital press.
If power to the digital press is interrupted,
• Locate the circuit breakers on the back of the digital press next
to the toner waste bottle.
• If either device is tripped, the switch is in the Off position
(down). Flip the switch up.
NOTE: If the device trips again or if power is not restored by the
above procedure, call your Xerox service representative.
Dry Ink/Toner Waste Bottle
Rear of
machine
Digital Press and
SFM GFI (24 amp)
Fuser GFI
(15 amp)