DocuColor 5000 User Guide
3-12
3. Paper information
Paper trays air adjustment:
Blowers help control the environmental conditions in the paper
trays to ensure optimum print capability:
• Each paper tray has two blowers and two fans. The blowers
are located in the front of each tray, while the two fans are
located on the right-side of the tray.
• The lead edge blower is on at all times and produces heated
air if one of the following selections are made: Coated paper,
Transparencies, or plain paper 106 g/m
2
or heavier. The trail
edge blower is on at all times and does not produce heated air.
• The paper trays also have air adjustment levers on the drawer
to regulate the direction of the air.
If the paper weight is between 60 and 256 g/m
2
, the position of the
air adjustment levers should be toward the front of the tray.
If the paper weight is between 257 and 300 g/m
2
, the position of
the air adjustment levers should be positioned toward the rear of
the tray.