Xerox Phaser 3330 System Administrator Guide

Initial Setup
12 Xerox
®
Phaser
®
3330 Printer
System Administrator Guide
Physically Connecting the Printer
1. Connect the power cord to the printer. Plug in the power cord to an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the
printer. Connect the other end of the cable to a correctly configured network port.
3. Turn on the printer.

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English