Xerox Phaser 3330 System Administrator Guide

Initial Setup
Xerox
®
Phaser
®
3330 Printer 15
System Administrator Guide
Initial Setup at the Control Panel
Installation Wizard
The Installation wizard starts the first time you turn on the printer. The wizard prompts you with a series
of questions to help you configure basic printer settings.
Note: You can change these settings at any time.
For details, see the User Guide for your printer.
Setting Altitude Adjustment
Atmospheric pressure, determined by altitude, can affect print quality. If the printer is located at
an elevation greater than 8200 feet or 2500 meters, to improve print quality, you can use Altitude
Adjustment.
To set Altitude Adjustment:
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Tools, then press OK.
3. Navigate to Setup, then press OK.
4. Navigate to Machine Settings, then press OK.
5. Navigate to Altitude Adjustment, then press OK.
6. To set the high altitude adjustment, select On, then press OK.

Xerox Phaser 3330 Specifications

General

Brand	Xerox
Model	Phaser 3330
Category	Printer
Language	English