Xerox Phaser 6510 User Manual

Symptom
Probable Causes Solutions
that your control panel and print
driver settings are correct.
The paper is damp. Replace the paper.
The humidity is too high. Reduce the humidity in the room
or move the printer to a new
location.
Spots or lines appear at regular
intervals on the prints.
One or more of the components in
the paper path is marking the
paper.
1 Print the Repeating Defects
pages.
For details, refer to Printing
Reports.
2 To determine the cause,
measure the distance between
the print defects.
• 28 mm (1.1 in.) - Drum
Cartridge
• 52 mm (2.1 in.) - Drum
Cartridge
• 94 mm (3.7 in.) - Drum
Cartridge
• 56.5 mm (2.2 in.) - Transfer
Roller
• 63 mm (2.5 in.) - Fuser
• 67 mm (2.6 in.) - Fuser
3 If the repeating defects match
one of the Drum Cartridge
distances, replace the one for
the affected color.
4 If the distance matches the
fuser or transfer roller, call for
service.
144
Xerox
®
Phaser
®
6510 Printer
User Guide
Troubleshooting

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English