Xerox Phaser 6510 User Manual

• To set the priority mode for print quantity, click Print Quantity Priority, then select an option.
• To set the limit for number of sheets to print, for Print Quantity, type a number.
• To specify the default paper tray, click Paper Tray, then select a paper tray. To allow automatic
tray selection, select Auto.
• To specify the default paper size for the default paper tray, click Paper Size, then select a
paper size.
• To specify the paper size for the Bypass Tray, click Paper Size (Bypass Tray), then select a
paper size.
• To select the maximum custom paper size width, for Custom Paper Size Width, type a number.
• To select the maximum custom paper size length, for Custom Paper Size Length, type a
number.
• To set the default output color, click Output Color, then select an option. To allow automatic
color output based on the original document, select Auto Detect.
• To set the default printing option for 2-sided printing, click 2-Sided, then select an option.
• To configure the printer not to print blank pages, for Remove Blank Pages, click the toggle
button.
Note: A check mark on the toggle button indicates that the feature is enabled.
• To set the default page orientation for the original document, click Original Orientation, then
select an option.
• To enable Wide A4 printing, for Wide A4, click the toggle button.
• To set the default pitch size, for Pitch Size, enter a number.
• To set the default output font point size, for Point Size, type a number.
• To set the default output font, click Font Name, then select a font.
• To specify the default symbol set for the selected font, click Symbol Set, then select an option.
• To set the maximum limit of lines allowed on the page output, for Lines per Page, type a
number.
• To enable Hex Dump, for Hex Dump, click the toggle button.
• To allow the printer to enhance the image automatically, for Image Enhancement, click the
toggle button.
6. To save your settings, click OK.
CCoonnffiigguurree SSeettttiinnggss ffoorr PPoossttSSccrriipptt
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator.
3. Click System→PDL Settings.
4. Click PostScript.
5. Configure the following settings as needed:
Xerox
®
Phaser
®
6510 Printer
User Guide
161
System Administrator Functions

Xerox Phaser 6510 Specifications

General

Brand	Xerox
Model	Phaser 6510
Category	Printer
Language	English