EasyManuals Logo
Home>Xerox>All in One Printer>VersaLink C405

Xerox VersaLink C405 User Manual

Xerox VersaLink C405
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #197 background imageLoading...
Page #197 background image
Probable Causes Solutions
The printer is connected to a power strip shared with
other high-power devices.
Plug the printer directly into the outlet or into a
power strip that is not shared with other devices.
The Auto Power Off feature is enabled to save
power.
Increase the Auto Power Off timer setting or disable
the Auto Power Off feature. For more information,
refer to the System Administrator Guide at www.
xerox.com/office/VLC405docs.
PPrriinntteerr DDooeess NNoott PPrriinntt
Probable Causes Solutions
The printer is in Power Saver mode. On the control panel, press the Power/Wake button.
The printer has an error. If the Status LED is blinking amber, follow the
instructions on the control panel to clear the error. If
the error persists, contact your Xerox representative.
The printer is out of paper. Load paper into the tray.
The incorrect paper is loaded for the print job. Load the correct paper in the appropriate tray. At the
printer control panel, specify the correct paper size,
type and color.
The paper settings for the print job do not match any
paper loaded in the paper trays at the printer.
From the print driver, select a paper tray containing
the correct paper.
A toner cartridge is empty. Replace the empty toner cartridge.
No control panel indicators are lighted. Power off the printer, confirm that the power cord is
plugged in correctly to the printer and the outlet,
then power on the printer. If the error persists,
contact your Xerox representative.
The printer is busy.
If the Status LED is flashing blue, a previous print
job could be the problem.
1 In the print driver, use the Printer Properties to
delete all print jobs in the print queue.
2 At the control panel, touch Jobs, then delete
all pending print jobs.
Load the paper in the tray.
If the Status LED does not flash once after you
send a print job, check the connection between
the printer and the computer. Power off the
printer, then power on the printer.
Xerox
®
VersaLink
®
C405 Color Multifunction Printer
User Guide
197
Troubleshooting

Table of Contents

Other manuals for Xerox VersaLink C405

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox VersaLink C405 and is the answer not in the manual?

Xerox VersaLink C405 Specifications

General IconGeneral
BrandXerox
ModelVersaLink C405
CategoryAll in One Printer
LanguageEnglish

Related product manuals