Xerox WorkCentre 6025 User Manual

Copying
Xerox
®
WorkCentre
®
6025 Multifunction Printer 103
User Guide
Changing the Color Balance
The Color Balance control allows you to adjust the print color of your printer. Each of the four primary
colors of red, green, blue, and gray balance, have five density settings. The density settings adjust the
output based on the level of color saturation. Adjusting the setting negatively lowers the density and
lightens the output. Adjusting the setting positively increases the density and darkens the output.
Examples of low density areas include faces and sky.
To change the color balance:
1. To select Color Balance, press the arrow buttons, then press OK.
2. Select the color you want to adjust, then press OK.
3. To adjust the density setting from -2 through +2, press the arrow buttons.
4. Press OK.
5. Select another color and adjust its density, or press the Return button to return to the Ready screen.

Xerox WorkCentre 6025 Specifications

General

Brand	Xerox
Model	WorkCentre 6025
Category	All in One Printer
Language	English