Xerox WorkCentre 6025 User Manual

Installation and Setup
Xerox
®
WorkCentre
®
6025 Multifunction Printer 39
User Guide
Installing the Drivers and Utilities for Macintosh OS X Version 10.5 and Later
This section includes:
• Installing the Print Driver .................................................................................................................................................. 39
• Adding the Printer ................................................................................................................................................................ 40
• Utilities ..................................................................................................................................................................................... 40
To access all features of the printer, you must:
1. Install the print driver.
2. Add the printer.
Note: Before you install the print driver, verify that the printer is plugged in, turned on, and
connected to an active network or by USB.
Installing the Print Driver
1. Insert the Software and Documentation disc into the appropriate drive on your computer.
Note: If the Software and Documentation disc is not available, you can download the latest drivers
from www.xerox.com/office/WC6025drivers.
2. Double-click WorkCentre 6025 Installer.
3. At the Introduction installer window, click Continue.
4. At the License Agreement, select I Agree, then click Next.
5. Select the destination disk, then click Continue.
6. To change the location of the driver installation, click Change Install Location.
7. Click Install.
8. If prompted, enter your password, then click OK.
9. Click Continue Installation.
10. To complete the installation and restart your computer, when the print driver finishes installing, click
Restart.

Xerox WorkCentre 6025 Specifications

General

Brand	Xerox
Model	WorkCentre 6025
Category	All in One Printer
Language	English