Xilinx ZC702 User Manual

ZC702 Board User Guide www.xilinx.com 11
UG850 (v1.7) March 27, 2019
Electrostatic Discharge Caution
Board Layout
Figure 1-2 shows the ZC702 board. Each numbered feature that is referenced in Figure 1-2
is described in Table 1-1 with a link to detailed information provided under Feature
Descriptions. Note that the image in Figure 1-2 is for reference only and might not reflect
the current revision of the board.
Electrostatic Discharge Caution
CAUTION! ESD can damage electronic components when they are improperly handled, and can result
in total or intermittent failures. Always follow ESD-prevention procedures when removing and
replacing components.
To prevent ESD damage:
• Use an ESD wrist or ankle strap and ensure that it makes skin contact. Connect the
equipment end of the strap to an unpainted metal surface on the chassis.
• Avoid touching the adapter against your clothing. The wrist strap protects components
from ESD on the body only.
• Handle the adapter by its bracket or edges only. Avoid touching the printed circuit
board or the connectors.
• Put the adapter down only on an antistatic surface such as the bag supplied in your kit.
• If you are returning the adapter to Xilinx Product Support, place it back in its antistatic
bag immediately.
Send Feedback

Xilinx ZC702 Specifications

General

Brand	Xilinx
Model	ZC702
Category	Motherboard
Language	English