Yaesu FT-450D User Manual

Page 14 FT-450D OPERATION MANUAL
PHONES
KEY
EASY OPERATION
RECEIVING
1. Connect your antenna to the ANT jack on the rear
panel.
2. Connect the after-market DC power supply (or car
battery) using the supplied DC power cable, and set
the POWER switch of the DC power supply to on.
3. Press and hold in the
[
POWER
(
ON/OFF
)]
switch
for one second to turn the transceiver on.
4. Rotate the
[
SQL/RF GAIN
]
knob to the fully
counter-clockwise position.
5. Rotate the
[
AF GAIN
]
knob to set a comfortable
audio level on incoming signals or noise. Clock-
wise rotation of the
[
AF GAIN
]
knob increases
the volume level.
6. Press the
[
BAND
]
/
[
BAND
]
button to select the
amateur band which you wish to begin operating.
7. Press the
[
MODE
]
/
[
MODE
]
button to select
the desired operating mode.
8. Rotate the
[
MAIN DIAL
]
knob to set the desired
frequency.
[
SQL/RF GAIN
]
knob
[
AF GAIN
]
knob
[
MAIN DIAL
]
knob
[
BAND
]
/
[
BAND
]
button
[
MODE
]
/
[
MODE
]
button
TRANSMIT
1. Connect the supplied MH-31A8J to the MIC jack
on the front panel.
2. To transmit, press the microphone’s PTT (Push
To Talk) switch, speak into the microphone in a
normal voice level.
3. Release the PTT switch to return to the receive
mode.
[
POWER
(
ON/OFF
)]
switch
NOTICE
Regarding of the
[
DSP/SEL
]
knob
The
[
DSP/SEL
]
knob is used for operating
various functions depending on the situation.
If you can not change the frequency/memory
channel by tuning the
[
DSP/SEL
]
knob, the
[
DSP/SEL
]
knob is selected to operate of one
of the DSP functions.
In this case, press the
[
DSP
]
button several
times until the “>” icon disappears from the
DSP Graphic Display.

Yaesu FT-450D Specifications

General

Product type	Portable CB radio
Product color	Black
Housing material	Aluminum
Microphone included	Yes
Input voltage	13.8 V
Display type	LCD
Output power	100 W
Frequency range	0.03 - 56 MHz
Channels quantity	500 channels

Weight and Dimensions

Depth	217 mm
Width	229 mm
Height	84 mm
Package weight	40000 g