EasyManuals Logo

Yaesu FT-450D User Manual

Yaesu FT-450D
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Page 18 FT-450D OPERATION MANUAL
RESETTING THE MICROPROCESSOR
The FT-450D has three reset methods.
EASY OPERATION
VFO/MEMORY RESET
Use this procedure to reset (clear out) the Memory
channels (Except the QMB channel) previously stored
and VFO data, without affecting any configuration
changes you may have made to the Menu settings.
1. Press and hold in the
[
POWER
(
ON/OFF
)]
button
for one second to turn the transceiver off.
2. Press and hold the
[(
V/M
)
/MW
]
button. While
holding it in, press and hold in the
[
POWER
(
ON/
OFF
)]
switch for one second to turn the trans-
ceiver on. Once the transceiver comes on, you
may release the
[(
V/M
)
/MW
]
button.
[(
V/M
)
/MW
]
button
[
ON/OFF
]
button
[
F
]
button
[
ON/OFF
]
button
[
RCL/HOME
]
button
[
ON/OFF
]
button
MENU MODE RESET
Use this procedure to restore the Menu settings to
their factory defaults, without affecting the memories
you have programmed.
1. Press and hold in the
[
POWER
(
ON/OFF
)]
button
for one second to turn the transceiver off.
2. Press and hold the
[
F
]
button. While holding it in,
press and hold in the
[
POWER
(
ON/OFF
)]
button
for one second to turn the transceiver on. Once
the transceiver comes on, you may release the
[
F
]
button.
FULL RESET
Use this procedure to restore all Menu and Memory
settings to their original factory defaults. All Memo-
ries will be cleared by this procedure.
1. Press and hold in the
[
POWER
(
ON/OFF
)]
button
for one second to turn the transceiver off.
2. Press and hold the
[
RCL/HOME
]
button. While
holding it in, press and hold in the
[
POWER
(
ON/
OFF
)]
button for one second to turn the trans-
ceiver on. Once the transceiver comes on, you
may release the
[
RCL/HOME
]
button.

Table of Contents

Other manuals for Yaesu FT-450D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yaesu FT-450D and is the answer not in the manual?

Yaesu FT-450D Specifications

General IconGeneral
Product typePortable CB radio
Product colorBlack
Housing materialAluminum
Microphone includedYes
Input voltage13.8 V
Display typeLCD
Output power100 W
Frequency range0.03 - 56 MHz
Channels quantity500 channels
Weight and Dimensions IconWeight and Dimensions
Depth217 mm
Width229 mm
Height84 mm
Package weight40000 g

Related product manuals