Yaesu FT-450D User Manual

Page 65FT-450D OPERATION MANUAL
M EMORY O PERATION
QMB
(
QUICK MEMORY BANK
)
The Quick Memory Bank is independent from the regular and PMS memories. You can quickly store operating
parameters for later recall.
Storage
1. Tune to the desired frequency on the VFO mode.
2. Press the
[
STO/VOX
]
button momentarily. The
“beep” will confirm that the contents of the VFO
have been written to the QMB memory.
Recall
1. Press the
[
RCL/HOME
]
button. The QMB
channel’s data will be shown on the display.
2. Press the
[
RCL/HOME
]
button to return to the
previous-used frequency (either a VFO or a
memory channel).
Advice:
Rotating the
[
MAIN DIAL
]
knob, or changing the op-
erating mode, will place the transceiver in the
“Memory Tune” mode (The “QMB” notation will re-
place the “MT-QMB” in the display), which is a tem-
porary “pseudo-VFO” method of tuning off of a stored
memory channel. If you do not over-write the con-
tents of the current memory channel, the original con-
tents will not be disturbed by the initiation of Memory
Tune operation. Press the
[
RCL/HOME
]
button to
return original QMB frequency and/or operating mode.
[
STO/VOX
]
button
[
RCL/HOME
]
button

Yaesu FT-450D Specifications

General

Product type	Portable CB radio
Product color	Black
Housing material	Aluminum
Microphone included	Yes
Input voltage	13.8 V
Display type	LCD
Output power	100 W
Frequency range	0.03 - 56 MHz
Channels quantity	500 channels

Weight and Dimensions

Depth	217 mm
Width	229 mm
Height	84 mm
Package weight	40000 g