Yaesu FT-450D User Manual

Page 60 FT-450D OPERATION MANUAL
M EMORY O PERATION
REGULAR MEMORY OPERATION
The Regular Memory of the FT-450D allows storage and recall of up to 500 memories, each storing frequency,
mode, and a wide variety of status information detailed previously. Memories may be organized into as many as
ten Memory Groups, and additionally you get two pairs of band-limit (PMS) memories along with one QMB
(Quick Memory Bank) memory and two Home channels.
Memory Storage
1. In the VFO mode, select the desired frequency,
mode, and status the way you want to have it
stored.
2. Press the
[
F
]
button followed by the
[
V/M/MW
]
button.
The blinking current memory channel number will
be shown on the display, and the contents of the
current memory channel will be shown on the dis-
play.
If there is no action by you within 90 second from
releasing the
[
V/M/MW
]
button the Memory Stor-
age procedure is canceled.
The memory storage procedure is canceled un-
less you operate it within 90 seconds.
3. Rotate the
[
DSP/SEL
]
knob to select the memory
channel in which you wish to store the data. If you
have selected a channel on which data is already
stored, that frequency will appear on the display.
4. Press the
[
V/M/MW
]
button momentarily to store
the frequency and other data into the selected
memory channel. A beep will confirm that you have
held the
[
V/M/MW
]
button.
You may over write new data into a channel on which
data is already stored.
Memory Channel Recall
1. Press the
[
V/M/MW
]
button, if necessary, to enter
the Memory mode. A memory channel number will
appear in the display.
2. Rotate the
[
DSP/SEL
]
knob to select the desired
memory channel.
Advice:
To work within a particular Memory Group, press the
[
DSP/SEL
]
button. Then rotate the
[
DSP/SEL
]
knob
to select the desired Memory Group. Now press the
[
DSP/SEL
]
button again. You may now choose the
memory channel within the selected Memory Group.
[
DSP/SEL
]
Knob
[
V/M
/MW
]
button
[
DSP/SEL
]
Knob
[
V/M
/MW
]
button

Yaesu FT-450D Specifications

General

Product type	Portable CB radio
Product color	Black
Housing material	Aluminum
Microphone included	Yes
Input voltage	13.8 V
Display type	LCD
Output power	100 W
Frequency range	0.03 - 56 MHz
Channels quantity	500 channels

Weight and Dimensions

Depth	217 mm
Width	229 mm
Height	84 mm
Package weight	40000 g