Page 23FT-450D OPERATION MANUAL
MY MODES OPERATION
The “My Modes” feature allows you to select the operating modes you wish to have available for selection via the
[
MODE
]
/
[
MODE
]
buttons. Only the desired modes will be displayed in the loop.
This feature can be very useful in an HF operation, where the AM/FM/DATA modes are not used.
RECEIVING
MY MODES SETUP
1. Press and hold the
[
F
]
button for one second to
enter the Menu mode again. The “ ” icon
will appear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select the menu
item “MY MODE”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment of
this menu item. The “ ” icon will be blinking.
4. Press the
[
MODE
]
/
[
MODE
]
buttons to choose
a mode you wish to skip (omit) from the mode
selection loop.
5. Rotate the
[
DSP/SEL
]
knob to select “OFF”, and
then press the
[
DSP/SEL
]
knob.
NOTE
The “OFF” selection sets the selected mode to be
skipped, while the “ON” selection sets the selected
mode to be included in the mode-selection list.
6. Press the
[
DSP/SEL
]
knob. The “ ” icon
returns to appear continuously.
7. Repeat steps 4 through 6 to select/deselect as
many modes as you like.
NOTE
The mode currently in use cannot be turned off.
8. Press and hold the
[
F
]
button for one second to save
the new setting and return to normal operation.
MY MODES OPERATION
Press the
[
MODE
]
/
[
MODE
]
buttons to choose the
operating mode on which you wish to operate. Only
those operating modes that have not been skipped
will appear as you scroll through the modes.
NOTE
If you want to recall an operating Mode which has
been set to my band “OFF”, Press the [F] button,
then press the
[
MODE
]
/
[
MODE
]
button until
the desired Mode appears.
[
F
]
button
[
DSP/SEL
]
knob
[
MODE
]
/
[
MODE
]
button
[
MODE
]
/
[
MODE
]
button
LSB
USB
CW
AM
FM
DATA
LSB
USB
FM
«
LSB US B FM
MODEMODE
CLARKEYER
To Next Page
Loading...
Need help?
General
Weight and Dimensions
