Yaesu FT-450D User Manual

Page 96 FT-450D OPERATION MANUAL
General
Rx Frequency Range: 30 kHz - 56 MHz (operating)
160 - 6 m (specified performance, Amateur bands only)
Tx Frequency Ranges: 160 - 6 m (Amateur bands only)
Frequency Stability: ±1 ppm/hour (@+25 °C, after warmup)
Operating Temperature Range: 14 °F ~ 122 °F (–10 °C ~ +50 °C)
Emission Modes: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM)
Frequency Steps: 10 Hz (SSB & CW), 100 Hz (AM & FM)
Antenna Impedance: 50 Ohms, unbalanced
Power Consumption: Rx (signal present) 1.5 A
Tx (100 W) 22 A
Supply Voltage: DC 13.8 V ± 10%
Dimensions (WxHxD): 9’ x 3.3” x 8.5” (229 x 84 x 217 mm)
Weight (approx.): 8.8 lb (4.0 kg)
Transmitter
Power Output: 100 watts (25 watts AM carrier)
Modulation Types: J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance
Maximum FM Deviation: ±5.0 kHz / ±2.5 kHz
Harmonic Radiation: Better than –60 dB (160 - 10m Amateur bands)
Better than –70 dB (6m Amateur band)
SSB Carrier Suppression: At least 60 dB below peak output
Undesired Sideband Suppression: At least 60 dB below peak output
Audio Response (SSB): Not more than –6 dB from 300 to 2400 Hz
Microphone Impedance: 600 Ohms (200 to 10 kOhms)
SPECIFICATIONS

Yaesu FT-450D Specifications

General

Product type	Portable CB radio
Product color	Black
Housing material	Aluminum
Microphone included	Yes
Input voltage	13.8 V
Display type	LCD
Output power	100 W
Frequency range	0.03 - 56 MHz
Channels quantity	500 channels

Weight and Dimensions

Depth	217 mm
Width	229 mm
Height	84 mm
Package weight	40000 g